Check out Hard Air Magazine!

25 May, 2013

Hammers Scopes are Outstanding Value!

If you are looking for a great value airgun-rated scope, then Hammers scopes really stack up well.

Archer Airguns has just introduced the Hammers 3-9 x 32AO scope. This has a mil-dot reticle, adjustable objective focusing down to 5 yards, good image quality and comes complete with a strong one-piece mount. And all this for just $49.99. It's outstanding value!

Below we see a photograph of the Hammers 3-9x32AO scope mounted onto a Ruger Air Hawk. It's the ideal scope to upgrade many popular air rifles such as this.




Archer Airguns also stocks the Hammers 3-9x40AO scope. Very similar to the 3-9x32AO scope, this benefits from the larger 40mm diameter objective lens giving improved brightness in poor lighting conditions. This Hammers scope is just $59.99 including the mount!

The photo below shows the Hammers 3-9x40AO scope mounted on a Gamo Whisper air rifle.




Randall, one of our customers, sent us his thoughts on the Hammers 3-9x40AO scope he purchased recently. He writes...

"A good scope that will stand up to the recoil of the springers I like to shoot is important to me. I don't want to be forever readjusting the scope zero from one shooting session to another, nor do I enjoy bold reticles which partially block the 1/4" bullseyes of the targets I shoot.

The Hammers 3-9x40AO scope you sent me more than satisfies the demands I require. I was surprised in the best of ways with the overall quality and its smooth operation, as well as the bright, sharp optics. You've chosen to sell another 5 star winner at a great price.

The addition of the one-piece mount is like the frosting. I'm very pleased with this purchase".

Randall, thanks for your input! As the word gets out about Hammers scopes, I'm sure we'll be receiving more compliments like this...

Read more...

18 May, 2013

Shooting the XS28M. Brent’s Progress

Brent purchased a Xisico XS28M from Archer Airguns recently. As an experienced firearms shooter with his first “magnum” spring-powered air rifle, he faced a learning curve (finding the best hold and pellets) on shooting his air new air rifle successfully. This blog post lists the emails we exchanged during his journey to mastery of the XS28M.



This is not an untypical experience for anyone new to big, powerful spring/piston air rifles (not just the XS28M), but please note as that every individual airgun has it’s own pellet preferences, the one that worked well with Brent’s gun may not work with another - and pellet’s that didn’t work well for him may work very well for another gun.

****

Brent wrote on 7 May...

Do you have any suggestions for "the" pellet for my new XS28M???? Purchased the Stoeger sample pack and none of those are close. Crosman Premier hp 7.9 gr are climbing low to high shot at 10yds and then out to 30 by about 5 inches.

I know some of it is me as I learn to handle the gun but dang, this is frustrating as hell. Suggestions????


****

Steve wrote on 7 May...

We test the XS28M using Stoeger X-Field pellets and have good success with them, although our tester is very experienced at shooting high power spring/piston air rifles and can tame the recoil consistently.

Also every gun is different, as you know, and will like it's own particular pellets. I'd certainly be looking for domed pellets, probably mid weight, as you are trying.

One suggestion is to make an internet search for the "best" pellets people find in the Ruger Air Magnum. This is a very similar air rifle to the XS28M and you may find some good suggestions there.

I hope this helps. Please let me know how you make out.


****

Brent wrote on 8 May...

Yes sir, have tried that primarily after watching your video. I can flat tell you it does not like being shot of my lead bags! LOL. I tend to be heavy handed so I am concentrating on learning to go light. 

****

Brent wrote on 8 May...

I do understand that taming the recoil is a lot of it with this magnum springer and learning the hold it wants is what I am working on.



I am experienced in centerfire and have considerable trigger time with those. I have a 22-250 I did some work on and I can consistently hold <1" groups at 300yds with it and the barrel I turned and made into a .17 Ackley Hornet will always do .275-.325 at 100 yds.  I remove the the stock and checked to see if anything was apparently loose or mis-aligned. I have cleaned the barrel twice now and have about 350 rounds down the tube and can manage about a 3/8 group…at times at 10 yds. I move out to 25yds and it's all over the place. I kid you not, with the Steoger x-magnums it will throw a pattern 3 feet wide…at times.  Seems to be a huge variation in pellet choice with this gun. Crosman Premier hp I have to adjust windage almost all the way left to hit and if I change over to the Stogers I have to adjust way right and then it is inconsistent too.  Nothing seems to pattern with any consistency. 


****

Steve wrote on 9 May...

One other thought. If you are using a scope, have you checked the 3 screws that hold the scope rail on the compression tube? It's possible these can work loose. If they have that would obviously cause a problem. A drop of Loctite Blue on the threads should stop that.

Good luck!

****

Brent wrote on 10 May...

Wasn't anything loose. I revisited the copper coated 10.19gr x-power pellets while ago and with the learning how to hold the rifle to tame the recoil I think I am now on the right track. I used my bags and corrected the parallax for 10 yds where I knew for certain I had it out and then shot off hand with the hold you recommend and managed 3 groups under .300. I then again used my bags and corrected parallax at 25 yds and shooting again off hand I managed 2 groups under 5/8ths. I marked my AO ring as the factory marking are incorrect by about 7 yds ea. 

For me, I find that the artillery hold and not wrapping my thumb around the grip but rather lying it along the side really tightened things up. I very well could be on my way to figuring this thing out. 

If I could hold the heavy thing steadier I would do better!! I'm only 5' 5" so it's dang near as big as me LOL. 


****

Brent wrote on 17 May ...

If I do my part, it'll do it. Looks like 4 but it's 5. Shot at 25yds, averaged 1082fps measured 3 ft from muzzle, sub 1/2" group with H&N Crow Magnum 9.26gr.  I shot several of these like this this morning with 5-10 mph winds crossing left to right. I have one 10 shot group that is a touch under  5/8th's. Best pellet I have found for it thus far. 

I did ever so lightly chamfer the breech, just enough to break the sharp edge over and then polished with a brass round head screw and jb's bore paste. Other than that, bone stock as you sent it to me. I have about 600 rounds down the tube now and am getting comfortable with it. 



Here’s Brent’s 25 yard 5 shot target. Success! Brent, congratulations for your persistence and determination!!!





Brent wrote again on 17 May...

I am still searching for magic pellet at 50, when I find it I'll let you know. What I did Stephen is purchase one of Straight Shooters .177 big sample kits and worked my way through them shooting 5 shot groups at 10 and 25 yds without changing anything…aim point, windage or elevation on the scope, magnification. I tried to keep everything as close to the same as possible for each. Once I had my top 3 I did it again and that gave me my top 2. The crowmag is the best overall for anything out to 25 and the 9.3 RWS supermag wins at 10yds for punching paper.

I just couldn't get the Stoegers to group as tight for me… Still could be me though. I may order some more of the copper plated 10.19's to try again though where I have more of them to play with.



Brent, thanks for recording your journey and for being prepared to share it with others!

Read more...

14 May, 2013

Silent Pellet Traps are Back in Stock Again.



Above, a Jumbo "Silent" Pellet Trap.


Archer Airguns "Silent" Pellet Traps have proved very popular over the years for use with all types of airgun, so much so that our manufacturer has had to re-tool for continued production. This has led to a temporary lack of availability, but production has resumed and we now have the full range of "Silent" Pellet Traps and Kits back in stock again.

You can see details on our pellet trap web page.

For those who have been waiting, I apologize for the inconvenience. Thanks for your patience! There's no change in prices, which we have held stable for many years.

Read more...

03 May, 2013

An Interesting QB57 Project Gun



Here is an interesting QB57 air rifle project built by Doug, another Archer Airguns customer. He writes...

"Stephen,

Here's the project gun. I decided to go the bed liner route, in case I want to go back to the wood look at some future point. I did wipe off the 'purple' Chinese varnish with acetone. The stain under the varnish actually looks more walnut like. Anyway, after a tune with a custom top hat in the piston, some silicone RTV in the rear spring guide to damp vibrations, a little flattening of the spring ends, some tar on the spring, and some moly-60 on the appropriate points, it's a sweet shooter. I addes an airsoft 'silencer' for looks. The scope is a 2.5X shotgun scope."

Doug, thanks! That's an excellent QB57 upgrade.

Read more...

About This Blog

This blog shares information, ideas and knowledge about air rifles. It compliments the information Stephen publishes on the Archer Airguns website, on YouTube and the Chinese Airgun Forum.

  © Blogger templates The Professional Template by Ourblogtemplates.com 2008

Back to TOP